Evap codes and California smog checks

About 1 in 5 failed first smog tests with the check-engine light on and a stored code involve an evap code, through September 2026. A stored code doesn’t show why a car failed, and it can’t tell you whether yours will pass.

By the SmogCheckDeals team, checked against BAR and DMV sources. Updated

Find a smog check near you

Use my location

What an evap code means

The evaporative emission system keeps fuel vapor in the tank and lines instead of letting it escape. The car’s computer tests that system and stores a code when it sees a leak or a flow problem, and a smog check reads those stored codes along with the check-engine light.

Evap codes are the P0440 to P045F range. They can point to a small or large leak, a loose or missing fuel cap, or a purge or vent problem. The code names what the computer saw, not the part behind it. A licensed technician can tell you which it is on your car.

After a repair, the car usually has to finish its own self-tests before it can pass. Drive normally and follow your owner’s manual or a licensed technician’s advice.

What to do next

Read what to do after a failed test, see the check-engine light and smog checks, or find stations by city.

Source: California Bureau of Automotive Repair inspection records, analyzed by SmogCheckDeals. BAR did not prepare or review this analysis.